- Home
- Graphics/Stickers
- Can-Am Outlander G2 Graphics Kit – Design 3
Can-Am Outlander G2 Graphics Kit – Design 3
Premium Can-Am Outlander G2 Graphics Kit – Design 3 for 2013–2024 models. Built using an ultra-durable graphics system approximately 530 microns thick and printed with professional-grade equipment for vivid, high-resolution colors. Choose your material, finish and make it your own.
UAB Alienas / AlienGraphicsMX
Navaršonių g. 33, Navaršonys, LT-38365 Panevėžio r., Lithuania
info@aliengraphicsmx.eu
ID: 690
Installation and care
Images, layouts and coverage
Vehicle photographs and 3D previews illustrate the design. The product's 2D flat layout, description and selected model/year define the decal pieces and coverage. Kits are not necessarily full wraps: some original surfaces and edges remain visible, and one panel may use several pieces. Review the layout and contact us before ordering if coverage is unclear. These explanations do not excuse a material mismatch with the agreed product description.
Compatibility
Select the correct make, model, version and year and tell us about aftermarket or modified plastics. Different versions, replacement fairings and parts from other years can have different shapes. A kit correctly made for the ordered specification is not defective solely because the vehicle differs from that specification. We remain responsible for an incorrect template where the correct information was supplied and the agreed fit is not achieved.
Installation and care
Unless product-specific instructions say otherwise, apply graphics dry to a clean, dry, properly degreased compatible surface. Check the pieces and positioning before final application and follow the supplied instructions for preparation, temperature, heating and care. Contact us if uncertain. Damage actually caused by incorrect self-installation or an independent installer is not our manufacturing defect. Defects in the goods, deficient instructions or installation for which we are legally responsible remain covered.
Premium Can-Am Outlander G2 Graphics Kit – Design 3 for 2013–2024 models, designed and manufactured specifically for ATV riding conditions.
Model-year limits depend on the engine and body version. The added 2023 options cover 450, 570, 650 and 1000, including the listed MAX versions; the added 2024 options cover 650 and 1000, including MAX. The 500 and 800 are earlier versions. This listing does not cover the new Outlander 500/700 G3L or 2025–2026 Outlander 850/1000R G3. Choose the matching generation, not the registration year alone.
Printed using professional equipment on the selected film and laminate. Appearance depends on the chosen materials, light and viewing angle.
The multilayer graphics system is approximately 530 microns thick where specified for the selected configuration. Actual wear depends on the surface, preparation, installation and use.
Available base materials:
- Standard White
- Chrome
- Holographic
- Silver Metallic
- Clear
Available finishes:
- Gloss
- Matte
- Gloss Cosmic Glitter
- Gloss Gold Glitter
- Gloss Silver Glitter
- Asphalt – rough textured finish
- Diamond – textured finish
- Prismatic – textured finish
The graphics kit is precision-cut specifically for the Can-Am Outlander G2 2013–2024.
Personalization and color adjustments are available upon request.
Please note that the graphics kit is designed to fit the original body panels and does not necessarily cover every visible painted or plastic surface of the ATV.
You can see all included decal parts in the 2D layout image.
Depending on the Can-Am Outlander G2 model year and body panel configuration, additional parts may also be included in the graphics kit.
Before production begins, you will receive a final 2D layout preview showing all decal parts that will be produced specifically for your ATV.
Please note: ATV mockups and 3D visuals are for illustration purposes only. The final 2D layout defines the exact contents of the graphics kit.
Decal Production & Material Properties
We use premium professional-grade materials from established manufacturers in the USA and Italy. These films are specifically engineered for demanding applications such as motocross, enduro and adventure motorcycles.
The complete graphics system is approximately 530 microns thick, depending on the selected base material and finish. A transparent pressure-sensitive acrylic adhesive provides strong bonding even on difficult motorcycle plastic surfaces.
The materials are extremely durable, flexible and designed for long-term use in demanding riding conditions.
Technical specifications:
- Total material thickness: approximately 530 microns
- Adhesion: 68 N / 25 mm (to stainless steel)
- Tensile strength: 35 N / 25 mm
- Adhesive: Transparent acrylic, pressure-sensitive
- Dimensional stability: ≤ 0.8 mm
- Recommended application temperature: +5 °C to +27 °C
- Service temperature range: –40 °C to +88 °C
- Chemical resistance: Resistant to mild acids, solvents, salts and moisture
Surface preparation:
Before application:
- The surface must be dry and completely clean – free from dust, dirt, grease, wax or other contaminants.
- It is highly recommended to clean the surface with isopropyl alcohol (IPA).
- When applying to curved or complex surfaces, a heat gun is recommended to help the film conform better.
- Apply decals using the dry application method only.
Navaršonių str. 33, Navaršonys, Panevėžys district, LT-38365
info@aliengraphicsmx.eu
